The option can be enabled in two ways:

1. Default profile: global configuration on the device, connected as a service without specifying a profile.
2. Named profile: connected as a service with the name of the profile.

Enable the configuration parameter in /etc/dpi/fastdpi.conf for the default profile without a named one:

cp_server=192.168.0.18/cp

Here 192.168.0.18 — is the name or the address of the information page¹⁾.

After the parameter is added you need to restart the service:

service fastdpi restart

In this case management is carried out through connecting service 5 without specifying a profile:

fdpi_ctrl load --service 5 --ip 192.168.0.1
fdpi_ctrl load --service 5 --login user01

Find out how to configure the named profile in the next section.

The maximum number of profiles for whitelists is set by the configuration parameter in etc/dpi/fastdpi.conf

1. for allow lists (service 5)

   max_profiles_white_list=4

   where 4 is the default value and 65535 is the maximum possible value

1. for allow lists (service 16)

   max_profiles_serv16=32

   where 32 is the default value and 65535 is the maximum possible value