Policing Management [Документация VAS Experts]
Документация VAS Experts Документация VAS Experts-mobile
in

Settings

  • Show pagesource
  • Old revisions
  • Export to PDF
  • Fold/unfold all
  • Backlinks
  • Show pagesource
  • Old revisions
  • Export to PDF
  • Fold/unfold all
  • Backlinks
    •   Stingray Service Gateway by VAS ExpertsSSG componentsFastDPI (DPI, BNG, NAT functions)Subscriber managementPolicing ManagementPolicing Management

    This is an old revision of the document!

    Policing Management

    Subscriber management is performed using the utility fdpi_ctrl.

    We recommend using Named profiles, which simplifies policing management.

    Command Syntax

    The general format of commands: 

    fdpi_ctrl command --policing policing_description_file [IP_list] [LOGIN_list]

    Explanation of command parameters:

    Parameter Description, possible values, and format Note
    command Values:
    1. load — load data
    2. del — delete. For --service, you need to specify the service_identifier
    3. list — display information for the specified IP_list or all information if the all argument is provided.     		In list and del commands, instead of an IP/LOGIN list, you can specify all, meaning the command will apply to all.
    policing_description_file A file in cfg format, e.g., tbf.cfg
    IP_list Values:
    1. --file — file with a list of IPs
    2. --ip — single IP, format: 192.168.0.1
    3. --ip_range — IP range (inclusive), format: 192.168.0.1-192.168.0.5
    4. --cidr — IP with port, format: 192.168.0.0/30, 5.200.43.0/24~ (CIDR format with excluded boundary addresses)     		Boundary addresses can be excluded from a CIDR range (following the classless addressing agreement — gateway and broadcast addresses) by adding the ~ symbol at the end of the CIDR definition, e.g., --cidr 5.200.43.0/24~.
    LOGIN_list Values:
    1. --file — file with a list of logins
    2. --login — single login, format: USER1, "FIRST_NAME LAST_NAME" (alternative for specifying a login with escaped special characters)     		"USER1" — option for specifying login in double quotes
    'USER2' — option for specifying login in single quotes
    A line starting with # is a comment.

    Examples

    1. Enable policing policy using a policing description file: 
      fdpi_ctrl load --policing tbf.cfg --ip 192.168.0.1
    2. Get a list of applied policing: 
      fdpi_ctrl list all --policing
    3. Get information for a specific IP: 
      fdpi_ctrl list --policing --ip 192.168.0.1
    4. Enable policing policy using a named profile: 
      fdpi_ctrl load --policing --profile.name tariff_10 --login kv_111

    Was this information helpful?