If you received a preinstalled system from us, please immediately refer to the Appliance installation instructionsection.
Otherwise, you need to install the VEOS operating system on your server yourself and give us remote SSH access and root rights to perform the installation and initial configuration of the platform. After the work is completed, the remote access can be closed.

1. Before rack-mounting the server, make sure it meets necessary requirements. If any discrepancies are found at this stage, contact VAS Experts technical support to promptly resolve the issue.
2. Install VEOS using the link.

• When partitioning a disk:

 ~ 20 GB for root partition
the rest of the space can be allocated for the /var directory
The Stingray SG partition does not use swap, but it may be required for system tasks, so 4GB can be allocated 

• Disable Hyper-threading in BIOS

1. Create a vasexpertsmnt user:

    adduser -m -G wheel -u 3333 vasexpertsmnt 

2. Set a complex password for the user vasexpertsmnt:

   passwd vasexpertsmnt

   For convenience, you can generate a password using openssl:

    openssl rand -base64 15 

3. Save the password for vasexpertsmnt.
4. Set permission for users of the wheel group to use all commands on behalf of all users, for this you need to add to /etc/sudoers the line:

   % wheel ALL=(ALL) NOPASSWD: ALL

5. To provide remote access via SSH and set restrictions on valid IP addresses from the list:

    45.151.108.0/22, 94.140.198.64/27, 78.140.234.98, 193.218.143.187, 93.100.47.212, 93.100.73.160, 77.247. 170.134, 91.197.172.2, 46.243.181.242, 93.159.236.11 

iptables -A INPUT -m conntrack --ctstate RELATED, ESTABLISHED -j ACCEPT
iptables -A INPUT -p tcp -s 45.151.108.0/22 ​​-m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 94.140.198.64/27 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 78.140.234.98 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 193.218.143.187 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 93.100.47.212 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 93.100.73.160 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 77.247.170.134 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 91.197.172.2 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 46.243.181.242 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 93.159.236.11 -m tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp --dport 22 -j DROP
service iptables save

If you are using firewalld:

firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "45.151.108.0/22" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "94.140.198.64/27" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "78.140.234.98" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "193.218.143.187" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "93.100.47.212" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "93.100.73.160" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "77.247.170.134" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "91.197.172.2" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "46.243.181.242" service name = "ssh" accept'
firewall-cmd --permanent --zone = public --add-rich-rule = 'rule family = "ipv4" source address = "93.159.236.11" service name = "ssh" accept'
firewall-cmd --reload
firewall-cmd --zone = public --remove-service = ssh --permanent

!Save your settings as the server will be rebooted during installation!

After making sure that remote access via SSH is provided, send to technical support of VAS Experts (Service Desk) file an application for installation of the Stingray SG DPI license with the password and username for SSH access.