====== Ipfix template formats for the Radius monitor (fdpi_radius) ======
{{indexmenu_n>6}}
Ipfix template formats for the Radius monitor (fdpi_radius)

Ipfix export is configured by means of the following settings:
<code>
ipfix_dev=em1
ipfix_udp_collectors=1.2.3.4:1500,1.2.3.5:1501
ipfix_tcp_collectors=1.2.3.6:9418
</code>
here ''em1'' presents the name of network interface being intended for the export\\ 
''ipfix_udp_collectors'' presents the addresses of udp collectors\\ 
''ipfix_tcp_collectors'' presents the addresses of tcp collectors\\ 

The template:
^№	^Number of bytes	^Data type	^IANA	^Description^
|1001	|4  |int32  |43823	|TIMESTAMP|
|4001   |4  |int32  |43823      |AAA-events type: 0 - beginning, 1 - end, 2 - update|
|4002   |-  |string |43823      |Accounting session ID (max. length - 64 bytes)|
|1003   |4  |ipv4   |43823      |IPv4 address, for the IPv6 it is equal to 0|
|1103   |16 |ipv6   |43823      |IPv6 address, for the IPv4 it is equal to 0 (::)|
|1002   |-  |string |43823      |LOGIN|
|4003   |4  |int32  |43823      |Connection type|
|4004   |-  |string |43823      |Calling-Station-Id|
|4005   |-  |string |43823      |Called-Station-Id|
|4006   |4  |ipv4   |43823      |NAS-IP-Address, for the IPv6 it is equal to 0|
|4106   |16 |ipv6   |43823      |NAS-IPv6-Address, for the IPv4 it is equal to 0 (::)|
|4007   |4  |int32  |43823      |NAS-Port|
|4008   |8  |int64  |43823      |Number of incoming bytes|
|4009   |8  |int64  |43823      |Number of outgoing bytes|

 Connection types (value of Radius-attribute Framed-Protocol):
^Type ^Desciption^
|0  | Attribute not set|
|1  | PPP|
|2  | SLIP|
|3  | AppleTalk Remote Access Protocol (ARAP)|
|4  | Gandalf proprietary SingleLink/MultiLink protocol|
|5  | Xylogics proprietary IPX/SLIP|
|6  | X.75 Synchronous|
|7  | GPRS PDP Context|


Ipfixreceiver configuration:
<code>
[InfoModel]
InfoElements =  timestamp,         43823, 1001, SECONDS, True
                event_type,        43823, 4001, INT32,   True
                acct_session_id,   43823, 4002, STRING
                source_ip4,        43823, 1003, IP4ADDR, True
                source_ip6,        43823, 1103, IP6ADDR
                login,             43823, 1002, STRING
                conn_type,         43823, 4003, INT32,   True
                calling_station_id,43823, 4004, STRING
                called_station_id, 43823, 4005, STRING
                NAS_ip4,           43823, 4006, IP4ADDR, True
                NAS_ip6,           43823, 4106, IP6ADDR
                NAS_port,          43823, 4007, INT32,   True
                input_bytes,       43823, 4008, UINT64,  True
                output_bytes,      43823, 4009, UINT64,  True

[ExportModelFile]
Delimiter = ;
ExportElements = timestamp, seconds, %%Y-%%m-%%dT%%H:%%M:%%S
                event_type
                acct_session_id
                source_ip4, decodeipv4
                source_ip6, decodeipv6
                login
                conn_type
                calling_station_id
                called_station_id
                NAS_ip4, decodeipv4
                NAS_ip6, decodeipv6
                NAS_port
                input_bytes
                output_bytes
</code>