This is an old revision of the document!
SWx Authorization Interface Settings
Section "fast-epdg.auth.swx"
| Parameter | Description | Value |
|---|---|---|
realm | Serviced realm | epc.mncYYY.mccXXX.3gppnetwork.org |
host | Client hostname | epdg.epc.mncYYY.mccXXX.3gppnetwork.org |
<diameter-hss-server-name-1> {} | HSS Server #1 parameters | |
<diameter-hss-server-name-2> {} | HSS Server #2 parameters | |
<diameter-hss-server-name-n> {} | HSS Server #n parameters |
Template:
fast-epdg {
auth {
interface =
swx {
realm =
host =
<server-name> {}
}
}
}
Example:
fast-epdg {
auth {
interface = SWx
swx {
realm = epc.mnc002.mcc250.3gppnetwork.org
host = epdg.epc.mnc002.mcc250.3gppnetwork.org
<server-name> {}
}
}
}
Section "fast-epdg.auth.swx.<diameter-hss-server-name-n>"
| Parameter | Description | Value |
|---|---|---|
priority | Load balancing priority | 0-100 |
local | HSS Server address:port | AAA.BBB.CCC.DDD:XXXX, [1111.2222.3333.4444.5555.6666.7777.8888]:XXXX |
remote | HSS Client address:port | AAA.BBB.CCC.DDD:XXXX, [1111.2222.3333.4444.5555.6666.7777.8888]:XXXX |
proto | Transport protocol | [sctp][tcp] |
Template:
fast-epdg {
auth {
interface =
swx {
realm =
host =
diameter-hss-server-1 {
priority =
local =
remote =
proto =
}
diameter-hss-server-2 {
priority =
local =
remote =
proto =
}
diameter-hss-server-3 {
priority =
local =
remote =
proto =
}
}
}
}
Example:
fast-epdg {
auth {
interface = SWx
swx {
realm = epc.mnc002.mcc250.3gppnetwork.org
host = epdg.epc.mnc002.mcc250.3gppnetwork.org
diameter-hss-server-1 {
priority = 50
local = 192.168.1.1:3868
remote = 192.168.2.1:3868
proto = sctp
}
diameter-hss-server-2 {
priority = 30
local = 192.168.1.1:3869
remote = 192.168.2.2:3868
proto = sctp
}
diameter-hss-server-3 {
priority = 20
local = 192.168.1.1:3870
remote = 192.168.2.3:3868
proto = sctp
}
}
}
}
