List of protocols
- Built-in protocols — updated along with the SSG software version. Installing a new version requires a DPI reboot, which causes traffic interruption.
If needed, they can be supplemented with up-to-date attributes from the VAS Cloud. This is only necessary for complex protocols, but the option is available for all. - Cloud protocols created by VAS Experts — are periodically updated from the VAS Cloud. This ensures that popular applications remain up-to-date as their behavior changes.
- Custom (user-defined) protocols — protocols created by users via the GUI using VAS Cloud tools. These have higher priority than those loaded from the VAS Cloud, and within them, IP:PORT takes precedence over IP and CIDR. It is possible to add a protocol based on IP, SNI, or AS. Guide.
| Protocol | ID | DPI version | Protocol group | Protocol type | Update | Description |
|---|---|---|---|---|---|---|
| netattachsdmp | 3066 | 12.2 | Network services | Built-in | As needed | NetAttach Storage Device Management Protocol transmits control and diagnostics data. |
| fjhpjp | 3067 | 12.2 | Network services | Built-in | As needed | A protocol for Fujitsu HPJP (High-Performance Job Processing), processing jobs. |
| ls3bcast | 3068 | 12.2 | Network services | Built-in | As needed | LS3Bcast broadcasts device announcements and topology updates in secure storage LANs. |
| ls3 | 3069 | 12.2 | Network services | Built-in | As needed | LS3 manages local sync between secure storage appliances and access control systems. |
| mgxswitch | 3070 | 12.2 | Network services | Built-in | As needed | MGXSwitch protocol manages frame relay and ATM switching in Cisco MGX platforms. |
| csd-mgmt-port | 3071 | 12.2 | Network services | Built-in | As needed | A protocol for CSD Management Port, managing CSD networked systems. |
| csd-monitor | 3072 | 12.2 | Debugging and measurement | Built-in | As needed | CSD-Monitor tracks secure content delivery system health and data throughput. |
| vcrp | 3073 | 12.2 | Network services | Built-in | As needed | Virtual Conferencing Relay Protocol manages stream forwarding and session state. |
| orbix-locator | 3075 | 12.2 | Network services | Built-in | As needed | Orbix-Locator maps and resolves CORBA object references in enterprise integrations. |
| orbix-config | 3076 | 12.2 | Network services | Built-in | As needed | Orbix-Config controls CORBA service properties and policies in enterprise deployments. |
| orbix-loc-ssl | 3077 | 12.2 | Network services | Built-in | As needed | Orbix-Loc-SSL provides secure locator sync and method dispatch over SSL/TLS. |
| orbix-cfg-ssl | 3078 | 12.2 | Network services | Built-in | As needed | Orbix-CFG-SSL handles secure CORBA configuration via SSL in Orbix middleware environments. |
| lv-frontpanel | 3079 | 12.2 | Network services | Built-in | As needed | LV-FrontPanel manages front panel device sync for AV and control system devices. |
| stm_pproc | 3080 | 12.2 | Network services | Built-in | As needed | Pre-processing telemetry sync for STM sensor fusion and processing layers. |
| tl1-lv | 3081 | 12.2 | Network services | Built-in | As needed | Low-verbosity TL1 variant for minimal bandwidth or embedded systems. |
| tl1-raw | 3082 | 12.2 | Network services | Built-in | As needed | Unformatted TL1 message stream over TCP, used for raw telecom control. |
| tl1-telnet | 3083 | 12.2 | Network services | Built-in | As needed | Carries TL1 protocol over a Telnet connection for legacy telecom interfaces. |
| itm-mccs | 3084 | 12.2 | Network services | Built-in | As needed | A protocol for ITM MCCS (Mission Critical Control System), managing critical systems. |
| pcihreq | 3085 | 12.2 | Network services | Built-in | As needed | PCI Host Request protocol manages command queues in PCI-to-CPU interfaces. |
| jdl-dbkitchen | 3086 | 12.2 | Data bases | Built-in | As needed | JDL-DBKitchen is used in secure cloud database automation and deployment tools. |
Was this information helpful?