Содержание

Policing Management

Subscriber management is performed using the utility fdpi_ctrl.

We recommend using Named profiles, which simplifies policing management.

Command Syntax

The general format of commands:

fdpi_ctrl command --policing policing_description_file [IP_list] [LOGIN_list]

Explanation of command parameters:

Parameter Description, possible values, and format Note
command Values:
1. load — load data
2. del — delete. For --service, you need to specify the service_identifier
3. list — display information for the specified IP_list or all information if the all argument is provided.
In list and del commands, instead of an IP/LOGIN list, you can specify all, meaning the command will apply to all.
policing_description_file A file in cfg format, e.g., tbf.cfg
IP_list Values:
1. --file — file with a list of IPs
2. --ip — single IP, format: 192.168.0.1
3. --ip_range — IP range (inclusive), format: 192.168.0.1-192.168.0.5
4. --cidr — IP with port, format: 192.168.0.0/30, 5.200.43.0/24~ (CIDR format with excluded boundary addresses)
Boundary addresses can be excluded from a CIDR range (following the classless addressing agreement — gateway and broadcast addresses) by adding the ~ symbol at the end of the CIDR definition, e.g., --cidr 5.200.43.0/24~.
LOGIN_list Values:
1. --file — file with a list of logins
2. --login — single login, format: USER1, "FIRST_NAME LAST_NAME" (alternative for specifying a login with escaped special characters)
"USER1" — option for specifying login in double quotes
'USER2' — option for specifying login in single quotes
A line starting with # is a comment.

Examples

  1. Enable policing policy using a policing description file:
    fdpi_ctrl load --policing tbf.cfg --ip 192.168.0.1
  2. Get a list of applied policing:
    fdpi_ctrl list all --policing
  3. Get information for a specific IP:
    fdpi_ctrl list --policing --ip 192.168.0.1
  4. Enable policing policy using a named profile:
    fdpi_ctrl load --policing --profile.name tariff_10 --login kv_111