====== Management ======
{{indexmenu_n>3}}
In order to filter a traffic of some particular subscribers, or exclude filtering of transit traffic, or provide filtering to other operators as a service - you will need to activate Subscriber Management to control this service. Please add configuration parameter to the file /etc/dpi/fastdpi.conf to activate:

<code>black_list_sm=1</code>

As a result, this service is configured on level of individual subscribers by [[en:dpi:dpi_components:platform:subscriber_management:subsman_cmd:start|fdpi_ctrl]].

Instruction format:
<code>
fdpi_ctrl command --service 4 [IP_list]
</code>
<note important>You can find more details on the instruction syntax and IP specification methods here: [[en:dpi:dpi_components:platform:subscriber_management:subsman_cmd:start|Control instructions]]</note>

<note tip>When the service is activated, only TCP traffic is blocked. To block UDP traffic as well, you must [[en:dpi:dpi_components:platform:subscriber_management:subsman_cmd:start#configuring_tcp_and_udp_protocol_blocking|enable the]] ''[[en:dpi:dpi_components:platform:subscriber_management:subsman_cmd:start#configuring_tcp_and_udp_protocol_blocking|udp_block]]'' parameter.</note>

Examples:

Activate the service for all subscribers and switch filtering off for an administrator:
<code>
fdpi_ctrl load --service 4 --cidr 192.168.0.0/24
fdpi_ctrl del --service 4 --ip 192.168.0.1
</code>

Enable the service for an independent system AS50538:
<code>
fdpi_ctrl load --service 4 --cidr 37.110.240.0/21 --cidr 109.235.216.0/21
</code>
 
Creating named profile and activating it to several subcribers
<code>
fdpi_ctrl load profile --service 4  --profile.name test_black --profile.json '{ "url_list" : "http://mysite.ru/myfile.bin" , "ip_list" : "http://mysite.ru/myfileip.bin", "cn_list" : "http://mysite.ru/myfilecn.bin", "redirect" : "http://mysite.ru/block", "federal" : 0 }'
fdpi_ctrl load --service 4 --profile_name test_black --ip 192.168.0.1
fdpi_ctrl load --service 4 --profile_name test_black --ip 192.168.0.2
</code>
here\\
in json format sets folowing profiles' parameters\\ 
redirect - web page to redirect to\\ 
federal : 0/1/2/etc. using local athorities blacklist\\ 
url_list - URL blacklist\\ 
ip_list - IP:PORT  blacklist\\ 
cn_list - Common Name blacklist

Blacklist can be loaded from external source, like "http://mysite.ru/myfilecn.bin", or in a local file, like "cn_list" : "/tmp/cn_list.bin"

Searching subscribers with named profile:
<code>
fdpi_ctrl list all --service 4 --profile.name test_black</code>

Deleting subscribers with named profile (the named profile has no subscribers using it)
<code>
fdpi_ctrl del profile --service 4  --profile.name test_black
</code>

Changing parameters of named profile (new settings apply to all subscribers with the named profile)
<code>
fdpi_ctrl load profile --service 4 --profile.name test_black --profile.json '{ "url_list" : "http://mysite.ru/myfile.bin" , "ip_list" : "http://mysite.ru/myfileip.bin", "cn_list" : "http://mysite.ru/myfilecn.bin", "redirect" : "http://mysite.ru/block", "federal" : false }'
</code>

Maximum number of profiles for blacklist service is configuerd by a parameter in /etc/dpi/fastdpi.conf
<code>
max_profiles_black_list=64
</code>
here\\
64 default value, 65535 maximum value\\
<note warning>The parameter is applied after service restart.</note>

=====Activation of IPv6 traffic blocking service=====
Instruction format:
<code bash>
fdpi_ctrl command --service 49 [Services_list] [IP_list or login]
</code>
<note important>You can find more details on the instruction syntax and IP specification methods here: [[en:dpi:dpi_components:platform:subscriber_management:subsman_cmd:start|Control instructions]]</note>

Activate the service:
<code bash>
fdpi_ctrl load --service 49 --login DEMO
</code>
or
<code bash>
fdpi_ctrl load --service 49 --vchannel 1
</code>

<note tip>When the service is activated, only TCP traffic is blocked. To block UDP traffic as well, you must [[en:dpi:dpi_components:platform:subscriber_management:subsman_cmd:start#configuring_tcp_and_udp_protocol_blocking|enable the]] ''[[en:dpi:dpi_components:platform:subscriber_management:subsman_cmd:start#configuring_tcp_and_udp_protocol_blocking|udp_block]]'' parameter.</note>