This is an old revision of the document!
VAS Experts DPI technical requirements
Minimum system requirements depending on the bandwidth:
VAS Experts DPI-6
- CPU intel Xeon with at least 4 cores with a frequency of 2.5 GHz and more
- RAM - 16 GB
- HDD - 500GB x2
VAS Experts DPI-10/20
- CPU intel Xeon with at least 6 cores with a frequency of 2.5 GHz and more
- RAM - 32 GB
- HDD - 500GB x2
VAS Experts DPI-40
- CPU intel Xeon with at least 12 cores with a frequency of 2.5 GHz and more
- RAM - 64 GB
- HDD - 1TB x2
VAS Experts DPI-60
- CPU intel Xeon with at least 16 cores with a frequency of 2.3 GHz and more
- RAM - 128 GB
- HDD - 1TB x2
VAS Experts DPI-80
- CPU intel Xeon with at least 22 cores with a frequency of 2.3 GHz and more
- RAM - 256 GB
- HDD - 1TB x2
VAS Experts DPI-100
- CPU intel Xeon with at least 22 cores with a frequency of 2.3 GHz and more
- RAM - 256 GB
- HDD - 1TB x2
The following are configuration examples:
VAS Experts DPI-6
| Feature | Value |
|---|---|
| Total throughput | up to 6 Gb |
| Hardware platform | 1U rackmount server 19″ |
| Number of subscribers | 400К |
| Maximum number of sessions | 4М |
| Maximum number of newly created sessions per second | 100К |
| Network interfaces | 6 x 1GbE |
| Latency | up to 30 μs |
Technical equipment specification (typical, recommended)
| Item | Specification | Number |
|---|---|---|
| Platform | Dell/Futjitsu/Sypermicro | 1 pcs. |
| CPU | E5-1650v4 | 1 pcs. |
| RAM | 8 GB 1866 MHz ECC Reg | 2 pcs. |
| HDD | 500 GB | 2 pcs. |
| RAID | 0,1 | 1 pcs. |
| PSU | 750W | 2 pcs. |
| NIC Bypass | Silicom PEG6BPi35 (or analogue) | 1 pcs. |
Technical equipment specification (minimal)
| Item | Specification | Number |
|---|---|---|
| Platform | Dell/Futjitsu/Sypermicro | 1 pcs. |
| CPU | E3-1240v2 (3.4Ghz) 4C | 1 pcs. |
| RAM | 8 GB | 2 pcs. |
| HDD | 500 GB | 2 pcs. |
| RAID | 0,1 | 1 pcs. |
| PSU | 400W | 2 pcs. |
| PCI-E | 3.0 x8 (in x16) Full-height slot | 1 pcs. |
| NIC Bypass | Silicom PEG6BPi6 | 1 pcs. |
VAS Experts DPI-20
| Feature | Value |
|---|---|
| Total throughput | up to 20 Gb |
| Hardware platform | 1U rackmount server 19″ |
| Number of subscribers | 2М |
| Maximum number of sessions | 16М |
| Maximum number of newly created sessions per second | 250К |
| Network interfaces | 2 x 10GbE |
| Latency | up to 30 μs |
Technical E5-16xx specification (typical, recommended option)
| Item | Specification | Number |
|---|---|---|
| Platform | Dell/Futjitsu/Sypermicro | 1 pcs. |
| CPU | E5-1650v4 | 1 pcs. |
| RAM | 8 GB 1866 MHz ECC Reg | 4 pcs. |
| HDD | 500 GB | 2 pcs. |
| RAID | 0,1 | 1 pcs. |
| PSU | 500W | 2 pcs. |
| NIC Bypass | Silicom PE210G2BPI9-SR (LR) | 1 pcs. |
Technical E5-26xx specification (recommended option)
| Item | Specification | Number |
|---|---|---|
| Platform | Dell/Futjitsu/Sypermicro with 2 slots | 1 pcs. |
| CPU | E5-2640v4 (10 cores, 2.4GHz) recommended frequency of 2,5 GHz and more | 1 pcs. |
| RAM | 8 GB 1866 MHz ECC Reg | 4 pcs. |
| HDD | 500 GB | 2 pcs. |
| RAID | 0,1 | 1 pcs. |
| PSU | 500W | 2 pcs. |
| NIC Bypass | Silicom PE210G2BPI9-SR (LR) | 1 pcs. |
VAS Experts DPI-40
Technical E5-26xx specification (typical, recommended option)
| Item | Specification | Number |
|---|---|---|
| Platform | Dell/Futjitsu/Sypermicro | 1 pcs. |
| CPU | E5-2697v2, E5-2690v4 | 1 pcs. |
| RAM | 8 GB 1866 MHz ECC Reg | 8 pcs. |
| HDD | 1 TB | 2 pcs. |
| RAID | 0,1 | 1 pcs. |
| PSU | 500W | 2 pcs. |
| NIC Bypass | Silicom PE210G2BPI9-SR (LR) | 2 pcs. |
Attention: Since version 3.0, the requirement for a processor to have at least 12 cores in case of E5-2697V2, must be taken into account when updating the software from version 2.X
VAS Experts DPI-80
Technical E5-26xx specification (recommended option)
| Item | Specification | Number |
|---|---|---|
| Platform | Dell/Futjitsu/Sypermicro | 1 pcs. |
| CPU | E5-2699 v4 | 1 pcs. |
| RAM | 16 GB 2133 MHz ECC Reg | 16 pcs. |
| HDD | 1 TB | 2 pcs. |
| RAID | 0,1 | 1 pcs. |
| PSU | 500W | 2 pcs. |
| NIC Bypass | Silicom PE310G4BPi9-SR (LR) | 2 pcs. |
Equipment referred to as typical will be pre-odered by us by default to reduce the delivery time.
All configurations are checked on the test bed before delivery.
Note: You can order the equipment meeting certain specification on your own, so the prices from the suppliers will be lower than specified ones.
Equipment with other characteristics is supplied only by individual order, delivery time is at least 8 weeks.