The parameters of the SWu interface are located in the file /etc/fast-epdg.conf
Parameter | Description | Value |
---|---|---|
ike | IKEv2 protocol parameters | aes256-sha256-sha1-prfsha256-prfsha1-modp2048-modp1024! |
esp | ESP protocol parameter | aes256-sha256-sha1-modp2048-modp1024! |
leftauth | Gateway authentication method | eap |
leftsubnet | Network serviced by the server | AAA.BBB.CCC.DDD/MM, 1111.2222.3333.4444.5555.6666.7777.8888/MM |
rightauth | Client authentication method | eap-diameter |
rightsourceip | Source of destination addresses for the client gateway | [%epdg][%diameter] |
auto | Action on startup | start |
Example:
conn epdg-eap-only ike=aes256-sha256-sha1-prfsha256-prfsha1-modp2048-modp1024! esp=aes256-sha256-sha1-modp2048-modp1024! leftauth=eap leftsubnet=10.0.0.0/8 rightauth=eap-diameter rightsourceip=%epdg auto=start