{{indexmenu_n>6}}
======SWx Authorization Interface Settings======
=====Section "fast-epdg.auth.swx"=====

^  Parameter                            ^  Description               ^  Value                               ^
| ''app_id''                           | Application ID            | swx                                   |
| ''realm''                            | Serviced realm            | epc.mncYYY.mccXXX.3gppnetwork.org   |
| ''host''                             | Client hostname           | epdg.epc.mncYYY.mccXXX.3gppnetwork.org  |
| ''<diameter-hss-server-name-1> {}''  | HSS Server #1 parameters  |                                      |
| ''<diameter-hss-server-name-2> {}''  | HSS Server #2 parameters  |                                      |
| ''<diameter-hss-server-name-n> {}''  | HSS Server #n parameters  |                                      |

**Template:**
<code bash>
fast-epdg {
	auth {
		interface = 
		swx {
			app_id = 
			realm = 
			host = 
			<server-name> {}
		}
	}
}
</code>

**Example:**
<code bash>
fast-epdg {
	auth {
		interface = SWx
		swx {
			app_id = swx
			realm = epc.mnc002.mcc250.3gppnetwork.org
			host = epdg.epc.mnc002.mcc250.3gppnetwork.org
			<server-name> {}
		}
	}
}
</code>

=====Section "fast-epdg.auth.swx.<diameter-hss-server-name-n>"=====
^ Parameter     ^ Description             ^ Value                                                             ^
| ''priority''  | Load balancing priority  | 0-100                                                             |
| ''local''     | HSS Server address:port  | AAA.BBB.CCC.DDD:XXXX, [1111.2222.3333.4444.5555.6666.7777.8888]:XXXX  |
| ''remote''    | HSS Client address:port  | AAA.BBB.CCC.DDD:XXXX, [1111.2222.3333.4444.5555.6666.7777.8888]:XXXX  |
| ''proto''     | Transport protocol       | [sctp][tcp]                                                       |

**Template:**
<code bash>
fast-epdg {
	auth {
		interface = 
		swx {
			app_id = 
			realm = 
			host = 
			diameter-hss-server-1 {
				priority = 
				local = 
				remote = 
				proto = 
			}
			diameter-hss-server-2 {
				priority = 
				local = 
				remote = 
				proto = 
			}
			diameter-hss-server-3 {
				priority = 
				local = 
				remote = 
				proto = 
			}
		}
	}
}
</code>

**Example:**
<code bash>
fast-epdg {
	auth {
		interface = SWx
		swx {
			app_id = swx
			realm = epc.mnc002.mcc250.3gppnetwork.org
			host = epdg.epc.mnc002.mcc250.3gppnetwork.org
			diameter-hss-server-1 {
				priority = 50
				local = 192.168.1.1:3868
				remote = 192.168.2.1:3868
				proto = sctp
			}
			diameter-hss-server-2 {
				priority = 30
				local = 192.168.1.1:3869
				remote = 192.168.2.2:3868
				proto = sctp
			}
			diameter-hss-server-3 {
				priority = 20
				local = 192.168.1.1:3870
				remote = 192.168.2.3:3868
				proto = sctp
			}
		}
	}
}
</code>