====== Policing for Captive Portal ======
{{indexmenu_n>5}}
First we select the protocols for Captive Portal availability in a separate class, as it is described in [[en:dpi:dpi_options:opt_priority:priority_config|Assignment of priorities]]. 

<note tip>These protocols typically are http/https/dns/icmp.</note>
<code bash>
http         cs0
https        cs0
dns          cs0
icmp         cs0
default      cs1
bittorrent   cs7
</code>

Next we create the configuration file captive_portal.cfg. It specifies the bandwidth limits in Captive Portal mode for each of 8 classes(([[en:dpi:dpi_options:opt_bandwidth_mgmt|More details on bandwidth control]])).

<code bash>
htb_inbound_root=rate 1mbit 
htb_inbound_class0=rate 8bit ceil 1mbit
htb_inbound_class1=rate 8bit ceil 8bit
htb_inbound_class2=rate 8bit ceil 8bit
htb_inbound_class3=rate 8bit ceil 8bit
htb_inbound_class4=rate 8bit ceil 8bit
htb_inbound_class5=rate 8bit ceil 8bit
htb_inbound_class6=rate 8bit ceil 8bit
htb_inbound_class7=rate 8bit ceil 8bit
htb_root=rate 1mbit 
htb_class0=rate 8bit ceil 1mbit 
htb_class1=rate 8bit ceil 8bit
htb_class2=rate 8bit ceil 8bit
htb_class3=rate 8bit ceil 8bit
htb_class4=rate 8bit ceil 8bit
htb_class5=rate 8bit ceil 8bit
htb_class6=rate 8bit ceil 8bit
htb_class7=rate 8bit ceil 8bit
</code>

  * htb_root - is the root class. It specifies the total bandwidth. The bandwidth is redistributed within this class
  * rate - is the lower bandwidth limit
  * ceil - is the upper bandwidth limit, that can be borrowed from the root class if available

We place a subscriber into Captive Portal when his account runs out of money:
<code bash>
fdpi_ctrl load --policing captive_portal.cfg --ip 192.168.0.1
fdpi_ctrl load --service 5 --ip 192.168.0.1
</code>

Here we unblock the subscriber upon a deposit to his account:
<code bash>
fdpi_ctrl load --policing rate_plan1.cfg --ip 192.168.0.1
fdpi_ctrl del --service 5 --ip 192.168.0.1
</code>