====== Support for subscribers with multiple IP ====== {{indexmenu_n>8}} Subscribers with multiple IPs are treated by DPI as one subscriber: services and available bandwidth management are common to all the IPs belonging to such a subscriber. Often such a subscriber is a corporate user who was given a channel and an IP addresses set, and then he autonomously allocates the available resources. Service and channel management for such a subscriber is performed by a codename (login) specified in [[en:dpi:dpi_components:platform:subscriber_management:subsman_cmd|control commands]] by corresponding ''--login'' long option.\\ To support the DPI login binding feature you need to [[en:dpi:dpi_components:platform:dpi_admin:admin_db#Activating the built-in database|activate the UDR]]. The binding of IP addresses with this name is performed using the special command fdpi_ctrl load --bind_multi --user subscriber_name:ip_address_or_range IP addresses can be assigned to a subscriber as a single IP address or by IP addresses range: 192.168.0.1 single IPv4 address 192.168.0.1-192.168.0.5 range (includes the range boundaries) 192.168.0.0/30 CIDR 192.168.0.1,192.168.0.3 list 2a00:0:0:0:7aac:c0ff:fea7:d4c/64 IPv6 subnet To delete all the IPs associated with login fdpi_ctrl del --bind_multi --login subscriber_name Deleting one of the IPs associated with login fdpi_ctrl del --bind_multi --ip 192.168.0.1 To list all the IP addresses belonging to subscriber with multiple IPs fdpi_ctrl list --bind_multi --login subscriber_name To list all the subscribers with multiple IPs fdpi_ctrl list all --bind_multi