====== Accounting data export using the IPFIX format ======
{{indexmenu_n>4}}

Starting from the VAS Experts DPI version 8.0, accounting data along with the Radius protocol data can also be exported using the ipfix format.
Ipfix export is configured by the following parameters in fastpcrf.conf:
<code>
ipfix_dev=em1
ipfix_udp_collectors=1.2.3.4:1500,1.2.3.5:1501
ipfix_tcp_collectors=1.2.3.6:9418
</code>
here ''em1'' is the name of network interface used to export\\ 
''ipfix_udp_collectors'' are the udp collectors addresses\\ 
''ipfix_tcp_collectors'' are the tcp collectors addresses\\ 

Only "in use" collector addresses should be specified: for example, if only the UDP collector is supported then there is no need to specify the ''ipfix_tcp_collectors''.

Шаблон:
^№	^Number of bytes	^Data type	^IANA	^Description^
|1001	|4  |int32  |43823	|TIMESTAMP|
|4001   |4  |int32  |43823      |AAA event type: 0 - beginning, 1 - end, 2 - update|
|4002   |-  |string |43823      |Accounting session ID (max. length is 64 bytes)|
|1003   |4  |ipv4   |43823      |IPv4 address, in case of IPv6 it is equal to 0|
|1103   |16 |ipv6   |43823      |IPv6 address, in case of  IPv4 it is equal to 0 (::)|
|1002   |-  |string |43823      |LOGIN|
|4003   |4  |int32  |43823      |Connection type|
|4004   |-  |string |43823      |Calling-Station-Id|
|4005   |-  |string |43823      |Called-Station-Id|
|4006   |4  |ipv4   |43823      |NAS-IP-Address, in case of IPv6 it is equal to 0|
|4106   |16 |ipv6   |43823      |NAS-IPv6-Address, in case of IPv4 it is equal to 0 (::)|
|4007   |4  |int32  |43823      |NAS-Port|
|4008   |8  |int64  |43823      |Incoming bytes number|
|4009   |8  |int64  |43823      |Outcoming bytes number|

Connection types (value of the Framed-Protocol Radius attribute):
^Type ^Description^
|0  | Attribute is not specified|
|1  | PPP|
|2  | SLIP|
|3  | AppleTalk Remote Access Protocol (ARAP)|
|4  | Gandalf proprietary SingleLink/MultiLink protocol|
|5  | Xylogics proprietary IPX/SLIP|
|6  | X.75 Synchronous|
|7  | GPRS PDP Context|


Ipfixreceiver configuration:
<code>
[InfoModel]
InfoElements =  timestamp,         43823, 1001, SECONDS, True
                event_type,        43823, 4001, INT32,   True
                acct_session_id,   43823, 4002, STRING
                source_ip4,        43823, 1003, IP4ADDR, True
                source_ip6,        43823, 1103, IP6ADDR
                login,             43823, 1002, STRING
                conn_type,         43823, 4003, INT32,   True
                calling_station_id,43823, 4004, STRING
                called_station_id, 43823, 4005, STRING
                NAS_ip4,           43823, 4006, IP4ADDR, True
                NAS_ip6,           43823, 4106, IP6ADDR
                NAS_port,          43823, 4007, INT32,   True
                input_bytes,       43823, 4008, UINT64,  True
                output_bytes,      43823, 4009, UINT64,  True

[ExportModelFile]
Delimiter = ;
ExportElements = timestamp, seconds, %%Y-%%m-%%dT%%H:%%M:%%S
                event_type
                acct_session_id
                source_ip4, decodeipv4
                source_ip6, decodeipv6
                login
                conn_type
                calling_station_id
                called_station_id
                NAS_ip4, decodeipv4
                NAS_ip6, decodeipv6
                NAS_port
                input_bytes
                output_bytes
</code>


A list of the correspondence between the Protocol and the port number in netfow5 can be found [[en:dpi:dpi_options:opt_statistics:statistics_info|here]].