Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| en:service:brass:opt_bras:reference_bras:params_fastpcrf:paramm_distrib_fastdpi [2018/10/29 08:41] – kvazikrav | en:service:brass:opt_bras:reference_bras:params_fastpcrf:paramm_distrib_fastdpi [2022/04/04 13:56] (current) – removed edrudichgmailcom |
|---|
| ====== 5 Parameters of CoA notifications being sent to FastDPI servers ====== | |
| {{indexmenu_n>5}} | |
| ^ Parameter ^ Format ^ Default value ^ Description ^ | |
| | fdpi_server_list | ip_address%dev:port{,ip_address%dev:port}* | no |FastDPI servers list. Optional suffix %dev specifies the name of interface from which you should establish connection with the specified ip-address. Example: ''fdpi_server_list = 92.168.10.12%eth1:29000,10.10.25.99%eth0:29000''. In the example, the connection will be established betweeen: a)192.168.10.12, port 29000 using eth1 interface and b)10.10.25.99, port 29000 using eth0 interface. The maximum number of servers in the list is 16. If FastDPI is withdrawn from service, then it must be removed from the list without fail.| | |
| | fifo_fsize | bytes | 1048576 |The size of one FIFO file. This parameter should not be greater than the ''rlimit_fsize''. If the current FIFO file has reached the maximum size, then the next FIFO file will be created. The number of files created is not limited. There is created individual sequential queue from FIFO files for each FastDPI server from the ''fdpi_server_list'' list, therefore irrelevant entries within the ''fdpi_server_list'' list will result in uncontrolled growth of the FIFO queue to this server and, as a result, can cause the file system overflow. FIFO files are automatically deleted when all the data they contain is sent to the FastDPI server. When restarting the FastPCRF, the FIFO queue from the previous server start is not used, all the data is lost and the FIFO queue is recreated instead.| | |
| | fifo_dir | directory | /var/log/dpi |The directory used to store the FIFO queue files.| | |
| | fifo_file_prefix | string | fastpcrf_fifo_ |FIFO queue file name prefix.| | |
| | fifo_leave_bad_file | boolean parameter | 0 |The value of 1 prevents fastpcrf from deleting the FIFO file which caused any error. It is used for testing purpose in case something is wrong with the file.| | |
| |
