Differences

This shows you the differences between two versions of the page.

--- en:micra_install [2015/04/06 20:57] – created translator1
+++ en:micra_install [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-**A typical connection diagram for Supermicro based platform:**\\
-{{http://vasexperts.ru/img/micra62.jpg}}\\
-IPMI - is an integrated control and monitoring interface of Supermicro platform\\
-[[http://kivbtn.ru/post/nastroika-ipmi-na-centos/|IPMI configuration]]\\
-\\
-\\
-**A typical connection diagram for  Dell r620 based platform:**\\
-{{http://vasexperts.ru/img/r620.3.jpg}}\\
-[[ftp://ftp.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_remote_ent_sys_mgmt/integrated-dell-remote-access-cntrllr-7-v1.00.00_User%27s%20Guide_en-us.pdf|iDRAC - is an integrated Dell Remote Access Controller: control interface.]]\\
-\\
-The external access network interface sends outbound requests to a cloud platform, netflow traffic transmission and SSH access for tech support, if required. You have to assign the IP address on initial install: \\
-[[ipsetincenos|IP address assignment]]\\
-\\
-IN1,2,3 - are [[dpi_config|dna0;dna2;dna4]] respectively. They connect the platform to internal operator's network.\\
-OUT1,2,3 - are [[dpi_config|dna1;dna3;dna5]] respectively. They connect the platform to external network (Internet).\\
-~~DISCUSSION|Please help us to improve our documentation. Let us know if you found an error or something is unclear.~~

Profile