Differences

This shows you the differences between two versions of the page.

--- en:dpi:dpi_options:opt_notify:notify_conf:start [2020/02/05 17:36] – ↷ Links adapted because of a move operation lexx26
+++ en:dpi:dpi_options:opt_notify:notify_conf:start [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== 2 Configuration ======
-{{indexmenu_n>2}}
-The option can be enabled in two ways:
-  - Default profile: global configuration on the device, connected as a service without specifying a profile.
-  - Named profile: connected as a service with the name of the profile.
-<note important>For BRAS you have to use **profiles named in the Radius-Accept attributes.**</note>
-===== Default profile =====
-Enable the configuration parameter in ///etc/dpi/fastdpi.conf// for the default profile without a named one:
-<code>ntf_server=192.168.0.18/ntf</code>
-Here <nowiki>192.168.0.18/ntf</nowiki> - is the name or the address of the server((In case this parameter ends by ? or &: the parameter UrlRedir is added to the formed URL. It points to a page selected by a subscriber.)) that hosts information page.
-<note important>You can include a part of the path into the address. It allows using the same server for several services.</note>
-After the parameter is added, you have to restart the service:
-<code>service fastdpi restart</code>
-In this case management is carried out through connecting service 6 without specifying a profile:
-<code>fdpi_ctrl load --service 6 --ip 192.168.0.1
-fdpi_ctrl load --service 6 --login user01</code>
-===== Named profile =====
-To work with a named profile, you do not need to specify the ntf_server parameter. The configuration is described in the service management section.\\
-The maximum number of profiles for notification is set by the configuration parameter in ///etc/dpi/fastdpi.conf//
-<code>max_profiles_ntf=65535</code>
-Here 65535 is a default value and the upper limit.
-<note warning>This is a cold parameter and requires a restart of fastdpi.</note>
-===== Logs =====
-Service status change (automatic shutdown) is recorded in the log, which is enabled by the setting
-<code>ajb_save_chnprg=1</code>
-For this log you can configure the following parameters (in the example the default value is specified):
-<code bash>ajb_chnprg_path=/var/dump/dpi #место размещения файлов с записью
-ajb_chnprg_fsize=1073741824 #максимальный размер лога
-ajb_chnprg_ftimeout=10 #периодичность записи в минутах
-ajb_chnprg_bufsize=32768 #размер внутреннего накопительного буфера
-ajb_save_chnprg_format=ts:prg:ipsrc #формат записи где ts - временная метка, prg - id активных в данных момент сервисов, ipsrc - IP адрес источника запроса (абонента)</code>
-Changes of service status is also recorded in the [[en:dpi:dpi_options:opt_li:start|clickstream]] in the prg field.

Profile

Settings

Differences