Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| en:dpi:dpi_options:opt_capture:capt_portal:start [2024/06/13 08:42] – elena.krasnobryzh | en:dpi:dpi_options:opt_capture:capt_portal:start [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Policing for Captive Portal ====== | ||
| - | {{indexmenu_n> | ||
| - | First we select the protocols for Captive Portal availability in a separate class, as it is described in [[en: | ||
| - | <note tip> | ||
| - | <code bash> | ||
| - | http cs0 | ||
| - | https cs0 | ||
| - | dns cs0 | ||
| - | icmp cs0 | ||
| - | default | ||
| - | bittorrent | ||
| - | </ | ||
| - | |||
| - | Next we create the configuration file captive_portal.cfg. It specifies the bandwidth limits in Captive Portal mode for each of 8 classes(([[en: | ||
| - | |||
| - | <code bash> | ||
| - | htb_inbound_root=rate 1mbit | ||
| - | htb_inbound_class0=rate 8bit ceil 1mbit | ||
| - | htb_inbound_class1=rate 8bit ceil 8bit | ||
| - | htb_inbound_class2=rate 8bit ceil 8bit | ||
| - | htb_inbound_class3=rate 8bit ceil 8bit | ||
| - | htb_inbound_class4=rate 8bit ceil 8bit | ||
| - | htb_inbound_class5=rate 8bit ceil 8bit | ||
| - | htb_inbound_class6=rate 8bit ceil 8bit | ||
| - | htb_inbound_class7=rate 8bit ceil 8bit | ||
| - | htb_root=rate 1mbit | ||
| - | htb_class0=rate 8bit ceil 1mbit | ||
| - | htb_class1=rate 8bit ceil 8bit | ||
| - | htb_class2=rate 8bit ceil 8bit | ||
| - | htb_class3=rate 8bit ceil 8bit | ||
| - | htb_class4=rate 8bit ceil 8bit | ||
| - | htb_class5=rate 8bit ceil 8bit | ||
| - | htb_class6=rate 8bit ceil 8bit | ||
| - | htb_class7=rate 8bit ceil 8bit | ||
| - | </ | ||
| - | |||
| - | * htb_root - is the root class. It specifies the total bandwidth. The bandwidth is redistributed within this class | ||
| - | * rate - is the lower bandwidth limit | ||
| - | * ceil - is the upper bandwidth limit, that can be borrowed from the root class if available | ||
| - | |||
| - | We place a subscriber into Captive Portal when his account runs out of money: | ||
| - | <code bash> | ||
| - | fdpi_ctrl load --policing captive_portal.cfg --ip 192.168.0.1 | ||
| - | fdpi_ctrl load --service 5 --ip 192.168.0.1 | ||
| - | </ | ||
| - | |||
| - | Here we unblock the subscriber upon a deposit to his account: | ||
| - | <code bash> | ||
| - | fdpi_ctrl load --policing rate_plan1.cfg --ip 192.168.0.1 | ||
| - | fdpi_ctrl del --service 5 --ip 192.168.0.1 | ||
| - | </ | ||