Differences

This shows you the differences between two versions of the page.

--- en:dpi:dpi_components:platform:dpi_ipv6:start [2018/04/29 13:41] – kvazikrav
+++ en:dpi:dpi_components:platform:dpi_ipv6:start [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== 9 IPv6 support ======
-{{indexmenu_n>9}}
-To enable IPv6 support, make sure that the ipv6 option is set to 1:
-<code>ipv6=1</code>
-in the dpi configaration file.
-Subscriber management is optimized for fixed size IPv6 networks. IPV6 subnetwork prefix size, set by default to /64, can be changed by the following setting
-<code>ipv6_subnetwork=64</code>
-Subnets with different size than the specified one in the configuration havn't so far supported simultaneousely.
-The subscriber can be simultaneously assigned an arbitrary number of IPv4 addresses ("white" and "gray") and IPv6 subnets. A special simplified command semantec is provided for subscribers with one IPv4 address and one IPv6 subnet.
-:!: IPv6 support requires additional memory and CPU resources,
-so if your subscribers aren't provided with IPv6 addresses,
-then it isn't recommended to enable IPv6 support in DPI

Profile