All parameters are specified by selecting from the output list. To explain the selection, you can click on the auxiliary button located to the right of each parameter.
All parameters are specified by selecting from the output list. To explain the selection, you can click on the auxiliary button located to the right of each parameter.
-
^ Параметр ^ Описание ^ Возможные значения ^
+
^ Parameter ^ Description ^ Possible values ^
| ''FULLFLOW_COMPRESS_ENABLE'' | :!: **Experimental setting, DO NOT change this yourself!**\\ \\ Enable background log compression for FULLFLOW | ''0'' — Off\\ ''1'' — On |
| ''FULLFLOW_COMPRESS_ENABLE'' | :!: **Experimental setting, DO NOT change this yourself!**\\ \\ Enable background log compression for FULLFLOW | ''0'' — Off\\ ''1'' — On |
| ''FULLFLOW_REPLACE_IP_CLASS_WITH_ORIGINAL_TOS'' | Enable DSCP from Original TOS\\ \\ Allows you to use the original Type of Service (ToS) value from the packet's IP header instead of the value assigned by DPI. When this option is enabled, the traffic class extracted from the original ToS will be displayed in the statistics and QoE reports.\\ \\ Two fields are transmitted from DPI to IPFIX:\\ \\ - ''IP_CLASS_OF_SERVICE'' — the traffic class assigned by DPI based on DSCP settings (by protocols and autonomous systems)\\ - ''originalTOS'' — the original value of the ToS field from the IP header before DPI processing (the first 3 bits contain the traffic class)\\ \\ By default, ''IP_CLASS_OF_SERVICE'' is used. When this parameter is enabled, the value from ''originalTOS'' is used.\\ \\ **Important:** To correctly transmit the full DSCP value, you must set ''netflow_tos_format=1'' in the fastdpi.conf file. Otherwise, only the traffic class is transmitted, not all DSCP bits. | ''0'' — Off\\ ''1'' — On |
| ''FULLFLOW_REPLACE_IP_CLASS_WITH_ORIGINAL_TOS'' | Enable DSCP from Original TOS\\ \\ Allows you to use the original Type of Service (ToS) value from the packet's IP header instead of the value assigned by DPI. When this option is enabled, the traffic class extracted from the original ToS will be displayed in the statistics and QoE reports.\\ \\ Two fields are transmitted from DPI to IPFIX:\\ \\ - ''IP_CLASS_OF_SERVICE'' — the traffic class assigned by DPI based on DSCP settings (by protocols and autonomous systems)\\ - ''originalTOS'' — the original value of the ToS field from the IP header before DPI processing (the first 3 bits contain the traffic class)\\ \\ By default, ''IP_CLASS_OF_SERVICE'' is used. When this parameter is enabled, the value from ''originalTOS'' is used.\\ \\ **Important:** To correctly transmit the full DSCP value, you must set ''netflow_tos_format=1'' in the fastdpi.conf file. Otherwise, only the traffic class is transmitted, not all DSCP bits. | ''0'' — Off\\ ''1'' — On |
