| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| en:dpi:dpi_components:dpiui:user_guide:admin_section:qoestor_man:configuration_qoe_stor [2026/04/20 08:43] – elena.krasnobryzh | en:dpi:dpi_components:dpiui:user_guide:admin_section:qoestor_man:configuration_qoe_stor [2026/05/04 09:09] (current) – [Table] elena.krasnobryzh |
|---|
| All parameters are specified by selecting from the output list. To explain the selection, you can click on the auxiliary button located to the right of each parameter. | All parameters are specified by selecting from the output list. To explain the selection, you can click on the auxiliary button located to the right of each parameter. |
| |
| | ^ Parameter ^ Description ^ Possible values ^ |
| | | ''FULLFLOW_COMPRESS_ENABLE'' | :!: **Experimental setting, DO NOT change this yourself!**\\ \\ Enable background log compression for FULLFLOW | ''0'' — Off\\ ''1'' — On | |
| | | ''FULLFLOW_REPLACE_IP_CLASS_WITH_ORIGINAL_TOS'' | Enable DSCP from Original TOS\\ \\ Allows you to use the original Type of Service (ToS) value from the packet's IP header instead of the value assigned by DPI. When this option is enabled, the traffic class extracted from the original ToS will be displayed in the statistics and QoE reports.\\ \\ Two fields are transmitted from DPI to IPFIX:\\ \\ - ''IP_CLASS_OF_SERVICE'' — the traffic class assigned by DPI based on DSCP settings (by protocols and autonomous systems)\\ - ''originalTOS'' — the original value of the ToS field from the IP header before DPI processing (the first 3 bits contain the traffic class)\\ \\ By default, ''IP_CLASS_OF_SERVICE'' is used. When this parameter is enabled, the value from ''originalTOS'' is used.\\ \\ **Important:** To correctly transmit the full DSCP value, you must set ''netflow_tos_format=1'' in the fastdpi.conf file. Otherwise, only the traffic class is transmitted, not all DSCP bits. | ''0'' — Off\\ ''1'' — On | |
| | | ''IPFIX_FULLFLOW_ENBALE_BLOCKED_DATA'' | Enable collection of blocked traffic data\\ \\ Enables the collection of statistics on blocked traffic: the number of discarded packets and bytes. | ''0'' — Off\\ ''1'' — On | |
| | | ''IPFIX_FULLFLOW_BLOCKED_DROP_THRESHOLD'' | Threshold for classifying traffic as “drop”\\ \\ If the ratio of dropped packets to forwarded packets exceeds the specified threshold, such traffic is marked as “Blocked.” | A coefficient ranging from 0 to 1, including floating-point numbers.\\ \\ Default value: ''0.9'' | |
| | | ''IPFIX_FULLFLOW_BLOCKED_POLICING_THRESHOLD'' | Threshold for classifying traffic as policed\\ \\ If the ratio of dropped packets to forwarded packets exceeds the specified threshold, such traffic is marked as policed. | A coefficient ranging from 0 to 1, including floating-point numbers.\\ \\ Default value: ''0.1'' | |
| | | ''FULLFLOW_VOIP_GROUP_FIELDS_ENABLE'' | Enable VOIP Traffic Data\\ \\ This setting enables the processing and collection of statistics for generating reports on VOIP traffic.\\ \\ **Important:** This setting is complex and requires the involvement of technical support specialists. Enabling it alone will not generate reports or produce any visible results—additional system configuration is required. | ''0'' — Off\\ ''1'' — On | |
| ==== 6 CLICKSTREAM Log Settings ==== | ==== 6 CLICKSTREAM Log Settings ==== |
| All parameters are specified by selecting from the drop-down list. To explain the selection, you can click on the auxiliary button located to the right of each parameter. | All parameters are specified by selecting from the drop-down list. To explain the selection, you can click on the auxiliary button located to the right of each parameter. |
