Differences

This shows you the differences between two versions of the page.

--- en:dpi:dpi_components:модуль_wi-fi_hotspot:start [2022/03/30 09:20] – edrudichgmailcom
+++ en:dpi:dpi_components:модуль_wi-fi_hotspot:start [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== 7 Wi-Fi HotSpot Module ======
-{{indexmenu_n>7}}
-===== Introduction =====
-The module provides the feature to [[https://vasexperts.ru/products/skat/identifikaciya-polzovatelej-v-seti-wifi/|authorize users by phone number in public Wi-Fi networks]].
-===== Architecture =====
-{{ :dpi:dpi_components:wifif_hotspot_scheme.png?600 |}}
-===== Scenarios of use =====
-When a subscriber connects to Wi-Fi, the router requests the DCHP server to obtain a new IP address. The server returns the addresses to the router and runs the shell-script, which activates the tariff with limited access and the “White List”. It makes sense to include in the white lists, for example, the site of the provider or organization providing public Wi-Fi.
-Then the subscriber is redirected to the browser start page, where he needs to go through the authorization by phone number. The web server receives a successful authorization response from the SMS gateway and, using a shell-script, disables restrictions specified on the DPI and redirects the subscriber to the desired page.
-{{ :dpi:dpi_components:wifi_hotspot_scenario.png?600 |}}
-===== Installation and Upgrade =====
-==== Hardware Recommendations ====
-In order to run the module you can use the following hardware or virtual machines matching the following characteristics:
-  - CPU 2.5 GHz, 1 pcs
-  - RAM 512 MB - 1 GB
-  - HDD 20 GB - 50 GB
-  - Operating system Cent OS 6.4 - 7+
-  - NIC ranging from 10 Mб/сек
-<note>Recommended operating system is Cent OS  7+
-If you need to install the module on Cent OS 6, make sure that supervisor 3+ is installed. If you do not have the needed package, plese contact the Stingray Service Gateway technical support.
-</note>
-<note important>Do not install the module on the same hardware running the DPI or the SSG DPI 2 management interface! Use a dedicated virtual machine instead.</note>
-==== Before installation ====
-=== New Virtual Machine ===
-  - Make sure the openssh-clients is installed, it is required to connect to the DPI
-  - The rest of environment will be installed automatically
-=== Old Virtual Machine ===
-  - Make sure the openssh-clients is installed, it is required to connect to the DPI
-  - If PHP version <7.1 is installed, uninstall the old one: <code>yum -y remove php*</code> The new version will be installed automatically during dpiui2 installation.
-  - If MySql is installed, uninstall it:<code>yum remove mysql mysql-server mysql-community-common</code> Also delete the MySql directory: <code>mv /var/lib/mysql /var/lib/mysql_old_backup</code> During wifi_hotspot installation MariaDB 10.2+ will be installed
-=== CentOS 6 ===
-Recommended operating system is Cent Cent OS  7+
-If you need to install the module on Cent OS 6, make sure that supervisor 3+ is installed. If you do not have the needed package, plese install it using the following commands:
-<code>
-sudo wget https://vasexperts.ru/install/supervisor-3.0-1.gf.el6.noarch.rpm
-yum install supervisor-3.0-1.gf.el6.noarch.rpm
-</code>
-==== Installation ====
-<note warning>Before installing or upgrading, check your internet connection. Run scripts with root privilege or using sudo.</note>
-<note important>**Attention**: You should to disable selinux. To do this, set SELINUX = disabled in the /etc/selinux/config file and restart server.</note>
-<note important>**Attention**: If you've configured the virtual machine using [[en:dpi:dpi_components:dpiui:dpiui2#hotspot_management|HotSpot Management]] section before you install this module, all the needed tools and settings will be installed automatically.</note>
-To install, run the script:
-<code>
-#!/usr/bin/env bash
-info () {
-    echo -e " info:    $@ ";
-}
-ok () {
-    echo -e " done:    $@ ";
-}
-error () {
-    echo -e  " ERROR:  $@";
-}
-CENTOSRELEASE=`cat /etc/redhat-release`
-SUBSTR=`echo $CENTOSRELEASE|cut -c1-22`
-SUBSTR2=`echo $CENTOSRELEASE|cut -c1-26`
-#Check OS version
-CentOsVersion=0
-if [ "$SUBSTR" = "CentOS Linux release 7" ]
-    then
-        CentOsVersion=70
-elif [ "$SUBSTR2" == "CentOS release 6.5 (Final)" ]
-    then
-        CentOsVersion=65
-elif [ "$SUBSTR2" == "CentOS release 6.4 (Final)" ]
-    then
-        CentOsVersion=64
-else
-    CentOsVersion=60
-fi
-#Configure repos
-info "Configuring repos..."
-rpm --import http://vasexperts.ru/centos/RPM-GPG-KEY-vasexperts.ru
-rpm -Uvh http://vasexperts.ru/centos/6/x86_64/vasexperts-repo-1-0.noarch.rpm
-MARIADB_REPO=/etc/yum.repos.d/mariadb.repo
-if [ "$CentOsVersion" == 70 ]
-then
-        rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
-        rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
-        echo "[mariadb]
-name=MariaDB
-baseurl=http://yum.mariadb.org/10.2/centos7-amd64
-gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
-gpgcheck=1" > $MARIADB_REPO
-else
-        rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-6.noarch.rpm
-        rpm -Uvh https://mirror.webtatic.com/yum/el6/latest.rpm
-        MACHINE_TYPE=`uname -m`
-        if [ ${MACHINE_TYPE} == 'x86_64' ]
-        then
-echo "[mariadb]
-name=MariaDB
-baseurl=http://yum.mariadb.org/10.2/centos6-amd64
-gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
-gpgcheck=1" > $MARIADB_REPO
-else
-echo "[mariadb]
-name=MariaDB
-baseurl=http://yum.mariadb.org/10.2/centos6-x86
-gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
-gpgcheck=1" > $MARIADB_REPO
-fi
-fi
-ok "Finished Configuring repos."
-#wifi_hotspot install
-info "Wifi hotspot package installing..."
-yum install -y wifi_hotspot --exclude=php-common*;
-info "Finished wifi_hotspot package installing."
-</code>
-The rpm wifi_hotspot package will be installed. It will be configured automatically according to the default configuration.
-Installation/upgrading of the following environment will be performed during the installation:
-  - PHP >= 7.1
-  - MariaDB >= 10.2
-  - Apache
-  - Composer
-  - PHP SSH2 lib
-  - Laravel/Lumen
-The necessary ports will be opened, and cron will be launched to perform scheduled background tasks during the installation process.
-The module will be installed to the \\ <code>/var/www/html/wifi_hotspot/</code> directory.
-After the installation, enter in the browser:
-\\ <code>http://<IP address of VM>/</code>
-==== Upgrade ====
-To update a previously installed version, run the following command: <code>yum install -y wifi_hotspot</code>
-==== Configuration ====
-System settings of the module are in the .env file: <code>/var/www/html/wifi_hotspot/backend/.env</code>
-The contents of the file are as follows:
-<code>
-#System settings, it’s worth to avoid modifying it
-APP_ENV=local
-APP_DEBUG=true
-APP_KEY=
-APP_TIMEZONE=UTC
-#System settings for connecting to the MySql database, it’s worth to avoid modifying it
-DB_CONNECTION=mysql
-DB_HOST=localhost
-DB_PORT=3306
-DB_DATABASE=wifi_hotspot
-DB_USERNAME=root
-DB_PASSWORD=vasexperts
-#Settings for connecting to the SMTP server. They serve to send authorization data in debug mode.
-CFG_SMTP_UNAME=smtptestvasexperts@gmail.com
-CFG_SMTP_PW=pH3xkXTp1
-CFG_SMTP_HOST=smtp.gmail.com
-CFG_SMTP_PORT=587
-CFG_SMTP_SECURE=tls
-CFG_SMTP_SENDER=smtptestvasexperts@gmail.com
-#System settings, modifying is fobidden
-CACHE_DRIVER=file
-QUEUE_DRIVER=database
-SESSION_DRIVER=cookie
-</code>
-<note important>If .env file has been modified, you should run the following command:\\ <code>php /var/www/html/wifi_hotspot/backend/artisan queue:restart</code></note>
-==== Version Information ====
-=== Version v.1.2.4 (02.10.2020) ===
-   * Bugs fixed
-=== Version v.1.1.0 (06.11.2019) ===
-   * The process of replacing the logo and icons through the dpiui2 interface reworked
-   * The size limitation of logo or icon file from 64kb to 750kb changed
-=== Version v.1.0.10 (10/25/2019) ===
-   * Correction of the display of the portal on mobile devices
-   * Correction of the re-authorization algorithm
-=== Version v.1.0.7 (15.09.2019) ===
-   * Created a new Wi-Fi HotSpot module
-===== Known Issues =====
-  * <del>When changing the logo within the [[en:dpi:dpi_components:dpiui:dpiui2#hotspot_management|HotSpot Management]] section there is a 64kb limit on the maximum file size. **Will be fixed in version v.1.1.0.**</del>