en:dpi:bras_bng:opt_bras_l2:ipv6:dhcpv6_opt:start [Документация VAS Experts]

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:dpi:bras_bng:opt_bras_l2:ipv6:dhcpv6_opt:start [2023/10/10 08:25] – external edit 127.0.0.1en:dpi:bras_bng:opt_bras_l2:ipv6:dhcpv6_opt:start [2023/10/13 13:39] (current) – removed elena.krasnobryzh
Line 1: Line 1:
-==== DHCPv6 settings for fastDPI ==== 
-{{indexmenu_n>3}} 
-The following DHCPv6 processing parameters can be set in fastdpi.conf: 
- 
-^  Parameter      Format  ^  Default value    Description  ^ 
-| bras_dhcp6_enable_rapid_commit | number | 0 | Rapid Commit enabled or disabled\\ The usual procedure for issuing an address in DHCPv6 consists of 4 steps (2 requests + 2 responses). You can use a 2-step procedure (Rapid Commit):\\ **0** - disable Rapid Commit;\\ **1** - enable Rapid Commit. The 2-step procedure for issuing an address will only apply to clients with Rapid Commit support | 
-| bras_dhcp6_enable_unicast | number | 0 | Server Unicast enabled or disabled\\ **0**  - unicast disabled. DHCPv6 unicast-requests from the client side will be ignored.\\ **1** - unicast enabled. | 
-| bras_dhcp6_preferred_lifetime | number | 3600 | Preferred IPv6 lease time, seconds. This value must be less than ''bras_dhcp6_valid_lifetime'' | 
-| bras_dhcp6_valid_lifetime | number | 7200 | IPv6 lease time, seconds.  This value must be more than ''bras_dhcp6_preferred_lifetime''. | 
-| bras_dhcp6_preference | number | -1 | The value of the Preference option in the DHCPv6 Advertise. This option sets the preference for a DHCPv6 server in a network with multiple DHCPv6 servers.\\ **-1** - does not specify the Preference option in the DHCPv6 Advertise. | 
-| bras_dhcp6_nak_lifetime | number | 60 | [Stingray SG 8.3] Lifetime of the Radius Reject response, seconds \\ If Radius has not issued an IPv6 address to the client, the client can retry frequent DHCPv6 requests, causing a storm of Access-Request for Radius. With this parameter, you can set the period of time during which the Stingray SG itself will respond to requests from such clients. |