Differences

This shows you the differences between two versions of the page.

--- en:dpi:bras_bng:cli:pcrfctl [2023/09/01 11:48] – elena.krasnobryzh
+++ en:dpi:bras_bng:cli:pcrfctl [2024/09/26 15:29] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== pcrfctl ======
+====== FastPCRF Management ======
+{{indexmenu_n>7}}
+The following are the fastPCRF commands, so you have to specify the fastPCRF address in the -r argument of the fdpi_cli utility.
+===== Authorization request queue =====
+[[dpi:bras_bng:radius_integration:radius_auth_fastpcrf_setup:pending_queue|Authorization request queue]] - is an internal fastPCRF queue, which is designed to smooth out the peaks of calls to the Radius-server. When fastDPI authorization from fastPCRF, it does not take into account the bandwidth of Radius-server. There are parameters in fastpcrf.conf that set the maximum length and time spent in the queue, but sometimes you need to manually clear the queue or view its statistics.
+==== pcrf auth queue stat ====
+Displays statistics on the internal queue of authorization requests:
+<code>
+fdpi_cli -r <address> pcrf auth queue stat
+</code>
+==== pcrf auth queue clear ====
+Clears the authorization queue. You can clear the entire queue with the command:
+<code>
+fdpi_cli -r <address> pcrf auth queue clear
+</code>
+or the oldest records by specifying the ''time = N'' parameter, where N is the number of seconds, - records older than the specified number of seconds will be removed from the queue:
+<code>
+fdpi_cli -r <address> pcrf auth queue clear time=60
+</code>
+===== Persistent reply queue =====
+{{anchor:persist_queue}}
+[[en:dpi:bras_bng:radius_integration:radius_auth_fastpcrf_setup:persistent_queue|Persistent queue]] management commands (fastPCRF response queues for authorization requests)
+==== pcrf persist queue stat ====
+Displays persistent queue statistics for each fastDPI:
+<code bash>
+> fdpi_cli -r <address> pcrf persist queue stat
+Statistics of persist queue (pcrf -> fastdpi):
+  FastDPI #0 '127.0.0.1%lo':
+    queue file: /var/spool/dpi/pcrf/pq-127.0.0.1:29000
+    current: page count=1, item count=0
+    connected at: 2019/12/04 12:02:52, -25.332764s (13249164373261240 ticks)
+    last sent: n/a (0 ticks)
+    next reconnect: n/a (0 ticks)
+    Statistics:
+      sent: packet=0, bytes=0, error=0
+      received: bytes=0, error=0
+      socket: open=1, close=0, buffer overflow (split packet)=0
+      queue: enqueue packet=0 (0 bytes)
+             drop head=0, push exception=0, clear count=0
+  FastDPI #1 '10.20.30.41%eth0':
+    queue file: /var/spool/dpi/pcrf/pq-10.20.30.41:29000
+    current: page count=1, item count=3560
+    last sent: n/a (0 ticks)
+    next reconnect: 2019/12/04 12:03:18, +0.705613s (13249242490512650 ticks)
+    Statistics:
+      sent: packet=0, bytes=0, error=0
+      received: bytes=0, error=0
+      socket: open=0, close=0, buffer overflow (split packet)=0
+      queue: enqueue packet=0 (0 bytes)
+             drop head=0, push exception=0, clear count=0
+</code>
+==== pcrf persist queue clear ====
+Clears all queues or only the specified queue.
+The command response is the queue statistics after clearing.
+<code bash>
+   # clears all queues
+fdpi_cli -r <address> pcrf persist queue clear
+   # clears a queue by its number
+   # the queue number can be found from the output of the pcrf persist queue stat command
+fdpi_cli -r <address> pcrf persist queue clear 1
+   # clears a queue by its name
+fdpi_cli -r <address> pcrf persist queue clear 127.0.0.1%lo
+</code>
+==== pcrf persist queue reconnect ====
+Allows you to reconnect to fastDPI without resetting the queue. It can be applied to a specific connection or to all.

Profile

Settings

Differences