| ''bras_l2tp_enable'' | Enabling BRAS L2TP (PPPoL2TP) functionality. Note: the ''bras_enable'' option must be enabled. Requires restart | |
| ''bras_l2tp_enable'' | Enabling BRAS L2TP (PPPoL2TP) functionality. Note: the ''bras_enable'' option must be enabled. Requires restart | |
| ''bras_l2tp_max_retransmit'' | Maximum number of CTL message retransmits (RFC 2661 p.5.8). If no acknowledgment is received for any retransmit — the tunnel is closed (as inactive). \\ Does not require restart | Default value — 5 |
| ''bras_l2tp_max_retransmit'' | Maximum number of CTL message retransmits (RFC 2661 p.5.8). If no acknowledgment is received for any retransmit — the tunnel is closed (as inactive). \\ Does not require restart | Default value — 5 |
-
| ''bras_l2tp_mru'' | Maximum size of a PPP packet encapsulated in L2TP. If an MTU is not explicitly set for the L2TP server — the value of the ''bras_l2tp_mru'' option is used.\\ :!: Parameter can be configured at the LNS server level via CLI | Default value — 1460 |
+
| ''bras_l2tp_mru'' | Maximum size of a PPP packet encapsulated in L2TP. If an MTU is not explicitly set for the L2TP server — the value of the ''bras_l2tp_mru'' option is used.\\ :!: Parameter can be configured at the LNS server level via CLI | Default value — 1462 |
| ''bras_l2tp_ratelimit'' | Control of the number of requests from a subscriber to open an L2TP tunnel/session per second (L2TP spam prevention). \\ Does not require restart | 0 — control disabled (default value) |
| ''bras_l2tp_ratelimit'' | Control of the number of requests from a subscriber to open an L2TP tunnel/session per second (L2TP spam prevention). \\ Does not require restart | 0 — control disabled (default value) |
| ''bras_l2tp_ratelimit_ban'' | Ban time for a subscriber when ''bras_l2tp_ratelimit'' is exceeded, in seconds. \\ Does not require restart | When control mode bras_l2tp_ratelimit is enabled (bras_l2tp_ratelimit != 0), this parameter must be set to a value other than 0 |
| ''bras_l2tp_ratelimit_ban'' | Ban time for a subscriber when ''bras_l2tp_ratelimit'' is exceeded, in seconds. \\ Does not require restart | When control mode bras_l2tp_ratelimit is enabled (bras_l2tp_ratelimit != 0), this parameter must be set to a value other than 0 |
