en:capt_portal [Документация VAS Experts]

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:capt_portal [2015/04/06 16:25] translator1en:capt_portal [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
Line 1: Line 1:
-First we select the protocols for Captive Portal availability in a separate class, as it is described in [[priority_config|Assignment of priorities]]. These protocols typically are http/https/dns. 
-<code> 
-bittorrent            
-http         8 
-https        8 
-dns          8 
-default      16 
-</code> 
  
-Next we create the configuration file captive_portal.cfg. It specifies the bandwidth limits in Captive Portal mode for each of 8 classes(([[opt_bandwidth_mgmt|More details on bandwidth control]])). 
- 
-<code> 
-htb_root=rate 1mbit  
-htb_class0=rate 8bit ceil 8bit  
-htb_class1=rate 1mbit ceil 1mbit 
-htb_class2=rate 8bit ceil 8bit 
-htb_class3=rate 8bit ceil 8bit 
-htb_class4=rate 8bit ceil 8bit 
-htb_class5=rate 8bit ceil 8bit 
-htb_class6=rate 8bit ceil 8bit 
-htb_class7=rate 8bit ceil 8bit 
-</code> 
-htb_root - is the root class. It specifies the total bandwidth. The bandwidth is redistributed within this class\\ 
-rate - is the lower bandwidth limit\\ 
-ceil - is the upper bandwidth limit, that can be borrowed from the root class if available 
- 
-We place a subscriber into Captive Portal when his account runs out of money: 
-<code> 
-fdpi_ctrl load --policing captive_portal.cfg --ip 192.168.0.1 
-fdpi_ctrl load --service 5 --ip 192.168.0.1 
-</code> 
- 
-Here we unblock the subscriber upon a deposit to his account: 
-<code> 
-fdpi_ctrl load --policing rate_plan1.cfg --ip 192.168.0.1 
-fdpi_ctrl del --service 5 --ip 192.168.0.1 
-</code> 
- 
-Future developments: a simplified (one step) method to put a subscriber into Captive Portal; support of various Captive Portal modes.